Products › Beds
Obstetric Beds: Optima Delivery Bed
With multiple functions to maximize comfort and to personalize care
Designed for gynaecological and maternity patients at any stage of pregnancy and childbirth, as well as post-partum. Using this bed it is no longer necessary to move the patient in labour to another bed at any time.
NEW SAFETY REQUIREMENTS
According to standard EN 60 601-2-52 for electric beds, handrails should minimize the risk of trapping the patient’s head, neck or limbs in order to avoid possible fatal accidents.
STABILITY AND HIGH LOAD
The MEDISA bed-base raising system provides optimum stability and withstands high loads, supporting weights of up to 200-230 kg depending on the model.
IMPROVES THE PATIENT’S POSITION AND AIDS THEIR RECOVERY
The cardiac chair position is critical for patients with heart and breathing problems, helping to enhance their recovery. Medical staff may sit the patient on our bed by simply pressing a lever, activating the piston.
EASE OF CLEANING
Our high quality products reduce cleaning time by up to 30%. Smooth surfaces and removable panels allow easy and fast cleaning and disinfection.
FEATURES – MAKING LABOUR EASIER
Designed for gynaecological and maternity patients at any stage of pregnancy or childbirth, as well as post-partum.
Using this bed it is no longer necessary to move the patient in labour to another bed at any time.
POSITIONING AND COMFORT
Nurses Control Panel
A panel that is for the sole use of medical personnel that allows the different functions of the bed to be activated or overridden. In addition, certain functions are pre-programmed (Trendelenburg, CPR, cardiac chair and Fowler positions) and can be activated by simply pressing a button.
The command includes two functions, one to adopt the cardiac chair position and another to reset the bed.
- Set of mattresses
- Set of leg troughs
- Set of grips
- Holder for Urine bag (REF. CHA20).
- Lifting Pole (REF. CHA17).
- Drip post (REF CHA15).
- Accessories trolley (MB-AVANT-02)
- Stirrups (MB-AVANT-03)
- IV Drip pole (MB-AVANT-04)
- Satellite control panel (MB-AVANT-05)
- Foot control (pedal) (MB-AVANT-06)
|Power supply||230/110V 50/60Hz|
|Maximum current intake||1.6A, 370 Volt.|
|Liquid ingress protection||IP 66|
|Protection class||Class I|
|Electric Shock Protection||Type B|
|Total length||2120 mm|
|Length in Chair position||1645 mm|
|Width including side rails||1030 mm|
|Patient surface width||890 mm|
|Height from floor to frame||min 640 mm
max 1000 mm
|Seat Section Angle||17°|
|Reverse Trendelenburg position||5°|
|Safe working load||230 kg|